The SANA Industries MAKE MICRO Pulveriser grinds with ease, safety and economy, offering a wide range of particle sizing of any non-abrasive material, hard or soft, dry or wet, from granular to finest dust of 300 mesh. Its dustless operation, keeps the surroundings free of dust and contamination which is very important for Dyes and Chemicals. Carefully designed, and ruggedly built, the SANA Industries MICRO Pulveriser assures long life. Every working part is made from selected material, tested to suit the specific duty. simple in operation, it can be easily opened and cleaned in few minutes, for grinding of different materials.

The material to be ground, is deposited into the feeding through, and fed to the rotor by means of feed screws, to maintain a uniform flow. The revolving hammers, grind the material against the ratchet teeth liner, until reduced to the mesh desired. The centrifugal force of the revolving hammers creates an air draft, that forces the finished product through the screen, to the collecting bag clamped to the out let at the bottom. The whole process is automatic in operation, and uniform in production. The rotor is driven by a heavy duty electric motor, and the feed drive, by means of a small or fractional horsepower electric motor, as the case may be.

SANA Industries MICRO Pulverisers are manufactured in various sizes. The baby size for use in laboratories and small cottage industries, and the bigger models for large industrial production. They can be made to work singly or batches. They are manufactured to suit any kind of grinding, by variation in feed screws, hammers, screens, and speed of the rotor.

The special design of the SANA Industries MICRO Pulveriser, and the air created the revolving hammers, not only cools the machine, but also maintains a low temperature of the material ground, with the result, certain heat sensitive materials, can also be ground advangeously. Once the Pulveriser is set to produce a particular grade of material, it would continue doing so day after day, with out the necessity of constant adjustment and re-adjustments. It does not require any skilled labour, to run the machine.

SANA Industries MAKE MICRO Pulveriser provides accurate mesh control, with proper particle sizing, which effects chemical reactions, solubility, colour, volume, weight, strength, appearance etc., of the material ground, which goes to make the fine character and market value of the finished product. Whenever blending and dispersing is required, the Pulveriser does it in one single operation so thoroughly, that the ingredients become inspirable and indistinguishable hence, these Pulverisers also find a wide application in the processing of cosmetics, cold water paints, dry colors, chemical, foodstuffs etc.

The SANA Industries MAKE MINI PULVERISER has been designed after years of reaserch, trial and test. A simple machine that grinds without stones. Other than abrasive material, that wears off the grinding steel parts, it grinds anything and everything, wet or dry and to the fineness required. It occupies very little space, largest size is 4 x 2 x 4 1/2 ft. height, easy to operate, wash and clean. Grinding is done under cool atmospheric air, thus retaining the original colour, taste and fragrance of the material ground, which no other machine can guarantee. The powder obtained is as good as hand pound powder, guaranteeing the Agmark seal.

It grinds all most all spices, masalas, salt, coffee, fresh fruits, vegetables, tobacco, sopari, herbs, toots, leaves, bark of trees, oil cake, dry fish, cattle and poultry feeds. soap chips, charcoal, bones, cardboard, cotton rags, leather and cork scrap, including chemicals, dyes, pigments, etc.

SANA Industries make cone pulverisers for grinding for grinding all non-abrasive minerals, ochars, food stuff, dye stuff, chemical etc.

Experience gained in the manufacture of Hammer Mills, Mini and Micro Pulverises over a period of years, ahs gone into the design of the SANA Industries Impact Pulverisers. The SANA Industries Pulverisers are acknowledged, in India and Abroad, for its robust construction, Reliability and Good Design.

The SANA Industries Impact Pulveriser is a versatile grinding unit of heavy and rugged construction and built for continuous operation day after day. The unit is especially designed for the medium fine, and fine size reduction of minerals, ocher’s, clays, food stuff, crude drugs, pharmaceutical products, brass, zinc, dross separation, and a wide range of chemicals, pulses, agarbathi materials, dyes, pigments, tapioca, tobacco, coconut shells, saw dust, tamarind seeds, soap nut, henna leaves, turmeric, katha, charcoal etc.

The S.R Impact Pulverisers meet most capacity requirements and lend themselves to a vide degree of adjustments with fineness of the finished product ranging from about 60 mesh to bulk passing through 300 mesh depending on a considerable extent to the particular material being handled. Unlike a hammer mill, it has no screens to break, wear out or clog in the crushing chamber. The SANA IMPACT PULVERISER combines grinding, classifying and conveying all in one single unit.

Type of gas(after burner): natural, BTU’s(after burner): 120,000, Gas train(after burner): Riello, Ignition at: 200C , Full power at 250C, Electrical: 220V / 60 Hz, No.& force of drum motor: 2 HP, No.& force of exhaust motor: 2 HP, No.& force of cooling arms motor: 1 HP, No.& force of cooler motor: 2 HP, No & force of loader motor: 1 HP, SCFM’s on smoke: 700, SCFM’s on cooling: 1500, Smoke thermometer: atmospheric, Bean / product thermometer: digital (Syscon), Afterburner thermometer: digital (Syscon), High limit afterburner thermometer: digital (Syscon), High limit roaster thermometer: atmospheric (White/Rogers) , Controls: digital on roaster, Software / CPU: Honeywell, High temperature security: instant shut-off, Panic button: N/A, Water quenching: no, Peephole: yes, Sampler: yes, Drum assembly: cast iron 8 mm, Smoke exhaust: type A 8” O, Cooling exhaust: type B 8” O, Loader: mechanical, Protective cover for hopper: yes, CGA Approvals / standards: yes.

Hourly Production (min – max): 240 Kg – 300 Kg , Maximum load per batch: 60 Kg, Total weight of Roaster: 150 Kgs, Roast times: Brown: 10 minutes Black: 15 minutes, Type of roasting: Thermal transfer, Type of gas ( roaster): natural / propane, BTU’S (Roaster): 400,000, Gas train (roaster): Robert Shaw (700 series), Pilot (on separate line): Honeywell Ignition: 0-2.5 sec, Full heat power in: 0.4 sec, Type of gas(after burner): natural BTU’s(after burner): 120,000, Gas train(after burner): GP combustion  Ignition at: 200C , Full power at 250C, Electrical: 220V / 60 Hz, No.& force of drum motor: 2 HP, No.& force of exhaust motor: 1.5 HP, No.& force of cooling arms motor: 1 HP, No.& force of cooler motor: 2 HP, No & force of loader  motor: 1 HP, SCFM’s on smoke: 800, SCFM’s on cooling: 1750 Smoke thermometer: atmospheric, Bean / product thermometer: digital (Watlow), Afterburner thermometer: digital (Watlow), High limit afterburner thermometer: digital (Watlow), High limit roaster thermometer: atmospheric (Watlow), Controls: digital (remote) Software / CPU: Honeywell Security breakers: On all moters High temperature security: Instant shut – off panic button: Yes water quenching: no peephole: Yes Sampler: Yes Drum assembly: cast iron 8mm smoke exhaust: Type A 12: O cooling exhaust: Type B8” O Loader: mechanical protective cover for hopper: Yes, CGA approvals / standards:Yes

Simple Design- Study Structure Easy to Operate, Supervise and Maintenance are the basic Principles on which we have designed our Automatic Feed Grinding Plants. Our Plants therefore, can conveniently be installed even at remote places where technical aid is not easily available.

Our Automatic feed Plants are placed on Single floor without any super structure. We have avoided complicated and unnecessary sophistication and automisation, where failure of one part in any machine results in complete Breakdown of Production.

We have developed Plants tailored to suit enterprising farmers (8 Tons Shift), Commercial farmers and Small Town Feed Producers (16-20 Tons Shift), Government Feed Distribution Programmes(20-24 Tons Shift), and a commercially operated Feed Plant (50 - 75 Tons shift).

We are Pioneers in this field, being the first to manufacture Automatic Feed Grinding Plants of 30 Tons Shift in the Country in the year 1970. We are the Leading suppliers of Feed Plants in the country with more than 200 Big and Small Plants working throughout the Nation.