The SANA Industries MAKE MICRO Pulveriser grinds with ease, safety and economy, offering a wide range of particle sizing of any non-abrasive material, hard or soft, dry or wet, from granular to finest dust of 300 mesh. Its dustless operation, keeps the surroundings free of dust and contamination which is very important for Dyes and Chemicals. Carefully designed, and ruggedly built, the SANA Industries MICRO Pulveriser assures long life. Every working part is made from selected material, tested to suit the specific duty. simple in operation, it can be easily opened and cleaned in few minutes, for grinding of different materials.

The material to be ground, is deposited into the feeding through, and fed to the rotor by means of feed screws, to maintain a uniform flow. The revolving hammers, grind the material against the ratchet teeth liner, until reduced to the mesh desired. The centrifugal force of the revolving hammers creates an air draft, that forces the finished product through the screen, to the collecting bag clamped to the out let at the bottom. The whole process is automatic in operation, and uniform in production. The rotor is driven by a heavy duty electric motor, and the feed drive, by means of a small or fractional horsepower electric motor, as the case may be.

SANA Industries MICRO Pulverisers are manufactured in various sizes. The baby size for use in laboratories and small cottage industries, and the bigger models for large industrial production. They can be made to work singly or batches. They are manufactured to suit any kind of grinding, by variation in feed screws, hammers, screens, and speed of the rotor.

The special design of the SANA Industries MICRO Pulveriser, and the air created the revolving hammers, not only cools the machine, but also maintains a low temperature of the material ground, with the result, certain heat sensitive materials, can also be ground advangeously. Once the Pulveriser is set to produce a particular grade of material, it would continue doing so day after day, with out the necessity of constant adjustment and re-adjustments. It does not require any skilled labour, to run the machine.

SANA Industries MAKE MICRO Pulveriser provides accurate mesh control, with proper particle sizing, which effects chemical reactions, solubility, colour, volume, weight, strength, appearance etc., of the material ground, which goes to make the fine character and market value of the finished product. Whenever blending and dispersing is required, the Pulveriser does it in one single operation so thoroughly, that the ingredients become inspirable and indistinguishable hence, these Pulverisers also find a wide application in the processing of cosmetics, cold water paints, dry colors, chemical, foodstuffs etc.

The SANA Industries MAKE MINI PULVERISER has been designed after years of reaserch, trial and test. A simple machine that grinds without stones. Other than abrasive material, that wears off the grinding steel parts, it grinds anything and everything, wet or dry and to the fineness required. It occupies very little space, largest size is 4 x 2 x 4 1/2 ft. height, easy to operate, wash and clean. Grinding is done under cool atmospheric air, thus retaining the original colour, taste and fragrance of the material ground, which no other machine can guarantee. The powder obtained is as good as hand pound powder, guaranteeing the Agmark seal.

It grinds all most all spices, masalas, salt, coffee, fresh fruits, vegetables, tobacco, sopari, herbs, toots, leaves, bark of trees, oil cake, dry fish, cattle and poultry feeds. soap chips, charcoal, bones, cardboard, cotton rags, leather and cork scrap, including chemicals, dyes, pigments, etc.